- Guaranteed Secure Payments on Every Order
- Refund if your item is not delivered or as described
- Buyer Protection after order confirmation
- Size: 38
- Place of Origin: China
- Brand Name: CLW
- Model Number: CLW5080SSL
- Weight: 5700.000 kg
RHD road sweeper
wheelbase 3300
water capacity 1.5m3
debris hopper 4m3
engine 95hp
vice engine 78hp
The main performance description of Street Cleaning Trucks :
◆ Cleaning device Type:four Center brush and rear nozzle, scan disk can automatically avoid obstacles;
◆ Nozzle: The roll-broom enhanced nozzle, built-in roll sweep, eliminate waste omission; rolling tire three
o'clock floating support, road profiling powerful; (national initiative)Pneumatic tube with a net antifreeze
device, can effectively ensure sprinkler parts are not due to structural damage caused by freezing; With
a leakproof drainage device, effectively prevent dirt build-up, to prevent fouling and clogging
junk falls back to the ground straw causing secondary pollution; (national patent technology)
◆ Trash the whole entire layer of SUS304 stainless steel, structural strength, does not rust ，Trash shape
with side large surface modeling, arc transition, in proportion to the whole car, nice.
◆ In the state of emergency, it can be manipulated by setting the manual pump trash, and sweep the
nozzle plate movements and other movements,special circumstances can work directly into the engine
compartment to detect vice and maintenance
◆ Functional device with enhanced pressure dust, the dust can be adapted to the cleaning surface thicker.
◆ With a variety of security alarm devices: water tank low water level, job tips, deputy engine temperature,
oil pressure, parking tips, hydraulic oil leak alarm, trash tipping, reset, and the back door open and
close security alarm devices.
- Size: 38
- Place of Origin: China
- Brand Name: CLW
- Model Number: CLW5080SSL
- Weight: 5700.000 kg
【Main specifications】 | ||||||
Product model name | CLW5080TSLD4 sweeper truck | |||||
Gross weight(Kg) | 8275 | Tank volume(m³) | 5.5-7 | |||
Payload(Kg) | 2380 | Overall dimension(mm) | 6700×2290×2500 | |||
Curb weight(Kg) | 5700 | Tank dimension (mm) | ||||
Cab seats(person) | 3 | Drive type | 4*2 | |||
Approach/departure angle(°) | 24/16 | Front/rear hang(mm) | 1210/1690 | |||
Axle No. | 2 | Wheelbase(mm) | 3800 | |||
Axle load (Kg) | 3310/4965 | Max speed (Km/h) | 99 | |||
【Chassis specifications】 | ||||||
Chassis model | DFA1080SJ12D3 | Manufacturer | Dongfeng Motor Co., Ltd | |||
Brand name | Dongfeng | Tires No. | 6 | |||
dimension(mm) | 6815×2080×2440 | Tire specification | 7.50-16 14PR | |||
Approach/departure angle(°) | 24/14 | Front track(mm) | 1770,1831 | |||
Steel spring number | 8/10 7,11/9 7 | Rear track(mm) | 1586,1640 | |||
Fuel type | Diesel | Emission standard | Euro3/Euro4 | |||
Engine model | Engine manufacturer | Displacement (ml) | power(kw) | |||
CY4102-CE4C | DongfengChaoyang diesel engine Co.,Ltd | 3856 | 91 | |||
Performance | ||||||
Control system | Manual Automatic | |||||
5 | Water tank volume (CBM) | 2 | ||||
Material of trash tank | Stainless steel | Material of water tank | Stainless steel | |||
Model of auxiliary engine | JX493G | Power of auxiliary engine(Kw) | 57KW | |||
Manufacturers of auxiliary engine | JiangXi ISUZU Engine Co., Ltd. | Max sweeping width(mm) | 3200 | |||
Sweeping speed (km / h) | 3-20 | Sweeping capacity( square meter /h) | 9000-60000 | |||
Maximum Grain size and quality (mm) | 100mm\±1.5kg | Cleaning Rate | 96% | |||
Main Characteristic | ||||||
1)The control box is in the cab, all kinds of system electrical centralized to control, and easy to operate! 2)Four scan disk combinated with suction nozzle in working. according to a different cleaning conditions Scan disk speed can be controlled by choosing three gear-High, medium and low, which can make sure there be have a good cleaning results in a variety of pollution status. and when met the obstacle, the scan disk can be have a automatic avoidance protections and features automatic reset function, and retracted automaticly, then reseted automaticly after over some obstacles! 3)Both of side of the scan disk can be working altogether, or unilateral work independently. 4)The core components of hydraulic systems adopts the original import! | ||||||
Please contact us if you want more product information, we are ready to provide service for you! | ||||||